home

PDS

RealmRealm AccountingMinistryPlatformeGivingPDSACSConnectShepherdGrowth MethodHeadMasterRefresh WebsitesTrust CenterGo MethodMissionInsite
RealmRealm AccountingMinistryPlatformeGivingPDSACSConnectShepherdGrowth MethodHeadMasterRefresh WebsitesTrust CenterGo MethodMissionInsite

What would you like to know more about?

Show Contents

thumbnailPDS

Zebra GX420d Wireless Label Printer

Configure Printer Settings

  1. In the Zebra Setup Utilities window, click Configure Printer Settings. The Label Parameters window displays.
    1. In the Units drop-down list, select inch.
    2. Set the width to 2.25 and the height to 4.00.
    3. Set the orientation to Normal.
  2. Click Next. The Speed and Darkness window displays. The options in this window set the speed of the label feed and the darkness of the ink.
  3. Click Next to accept the default selections. The Media window displays.
  4. Click Next to accept the default selections. The Advanced Settings window displays.
  5. Click Next to accept the default selections. The Real Time Clock window displays.
  6. Click Next to accept the default selections. The Front Panel Protection window displays.
  7. Click Next to accept the default selections. The Sensor Settings Protection window displays.
  8. Click Next to accept the default selections. The Save Settings window displays.
  9. Click Finish.
    Tip: By default, Save settings to File is cleared. This ensures that your saved settings are stored in your printer.
Equipment
PDS

Last updated: October 29, 2024